[Tigers] Brake Line Question

[Joe Brown]

 I have a question about how the hard brake line running to the rear axle
attaches to the flex line.  I have two clips that slip over tabs on the
front crossmember to join the flex  and hard lines on the front end (see
attached photo) but I can't find something similar for the rear end.  There
is a tab with a hole welded to the body just in front of the rear axle and
another tab on the axle itself and I guess I can use them without a clip.
Should there be clips for the back like there are on the front?

The parts manual doesn't show these clips (that I can find).  The repair
manual shows them with a note that says "may not be used in all locations"
or something like that.


Thanks,
Joe Brown
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20180801/a6167f4d/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_20180731_171213.jpg
Type: image/jpeg
Size: 36479 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20180801/a6167f4d/attachment-0001.jpg>