[Tigers] 260/289 Flywheel Mounting

[Rob Hogan]

Thanks for the information.  That part must have been on one of my 3
purchased crankshafts.

Rob Hogan

On Thu, Mar 2, 2017 at 10:59 AM, Ron Fraser <rfraser at bluefrog.com> wrote:

> Rob
>
>                 That part is for Automatic Transmission Flex plate not the
> manual transmission Flywheel.
>
>
>
> C2OZ-6A366-A   Flywheel reinforcing plate – listed in Ford Master Parts
> catalog
>
>
>
> Ron Fraser
>
>
>
> *From:* Tigers [mailto:tigers-bounces at autox.team.net] *On Behalf Of *Rob
> Hogan via Tigers
> *Sent:* Thursday, March 02, 2017 10:11 AM
> *To:* Tiger's List <tigers at autox.team.net>
> *Subject:* [Tigers] 260/289 Flywheel Mounting
>
>
>
> There is probably an answer to this in some SBF book but I haven't found
> it yet.
>
>
>
> There is a thin ring that was under the 260's flywheel bolt heads somewhat
> acting like a washer or load distribution flat ring.  Since I'm building
> both the original 260 & the HP 289, I don't have another of those rings
> with the 6 holes for the flywheel mounting.
>
>
>
> Does anyone know if that part is absolutely necessary?
>
>
>
>
>
> Rob Hogan
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20170302/17ad2772/attachment.html>