[Spridgets] just a double check.....

[Kevin Valentine]

Mark,

Yes, the ends where the bolts go thru the clamp are supposed to be flush
with the block and the center section of the clamp where the dizzy goes
thru is slightly raised.

Kevin V.
Tuscarora, Pa

On Mon, Jul 22, 2024 at 9:17 AM Mark Haynes via Spridgets <
spridgets at autox.team.net> wrote:

> I still need to turn my dizzy clamp plate around so that the clamp bolt is
> on top and visible, so I thought that I'd check that since the end sections
> where its bolted to the block are not planar to the clamp portion, that
> they are to be assembled flush to the block and the clamp portionis raised.
> This is how I have it assembled, just a check that it should be this way
> and I'm not reducing the the engagement with the drive gear.
> Thanks, still looking for the no-start cause,
> Mark Haynes
> It only goes one way- Pay It Forward
> ------------------------
>
> spridgets at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/pipermail/spridgets
> http://autox.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/kevinv1275@gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20240722/daebec0a/attachment.htm>