[Spridgets] just a double check.....

[Mark Haynes]

I still need to turn my dizzy clamp plate around so that the clamp bolt is
on top and visible, so I thought that I'd check that since the end sections
where its bolted to the block are not planar to the clamp portion, that
they are to be assembled flush to the block and the clamp portionis raised.
This is how I have it assembled, just a check that it should be this way
and I'm not reducing the the engagement with the drive gear.
Thanks, still looking for the no-start cause,
Mark Haynes
It only goes one way- Pay It Forward
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20240722/50a12f5a/attachment.htm>