[Spridgets] Name that part (real LBC content).

[GUY DAY]

A hole carrier.
A Lucas parts templateA very difficult to judge sized hole carrier or 
template for Lucas parts shown without a scale bar.

------ Original Message ------
From: "Weslake1330 via Spridgets" <spridgets at autox.team.net>
To: "Spridgets" <spridgets at autox.team.net>
Sent: Wednesday, 5 Oct, 22 At 20:26
Subject: [Spridgets] Name that part (real LBC content).

Hi List,

Well the part doesn't have a real name because I made it from 6 mm (its 
probably old enough to be 1/4") aluminium plate the previous owner of my 
house left behind in the garage about 20 years ago.  If I could have 
bought one I would have.


Lacking both a pillar drill and a Rolls-Royce (aviation?) apprenticeship 
where you get to file metal blocks for several years, it's almost the 
best I could manage.  The Bosch jigsaw wasn't keen (it never is) on 
cutting aluminium plate this thick but managed some of it.


I'm not particularly tempted to make another one because it's not 
something I'm likely to use very often and it will get the job done 
despite being slightly lower than the standard I'd hoped for.  So, what 
is it?


Regards



Daniel
  ------------------------
spridgets at autox.team.net
Donate: http://www.team.net/donate.html 
<http://www.team.net/donate.html>
Suggested annual donation: $12.75
Archive: http://www.team.net/pipermail/spridgets 
<http://www.team.net/pipermail/spridgets> 
http://autox.team.net/archive <http://autox.team.net/archive>
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/spridgets/grday@btinternet.com 
<http://autox.team.net/mailman/options/spridgets/grday@btinternet.com>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20221006/37e49b78/attachment.htm>