[Spridgets] Name that part (real LBC content).

[Weslake1330]

Hi List,

Well the part doesn't have a real name because I made it from 6 mm (its
probably old enough to be 1/4") aluminium plate the previous owner of my
house left behind in the garage about 20 years ago.  If I could have bought
one I would have.

Lacking both a pillar drill and a Rolls-Royce (aviation?) apprenticeship
where you get to file metal blocks for several years, it's almost the best
I could manage.  The Bosch jigsaw wasn't keen (it never is) on cutting
aluminium plate this thick but managed some of it.

I'm not particularly tempted to make another one because it's not something
I'm likely to use very often and it will get the job done despite being
slightly lower than the standard I'd hoped for.  So, what is it?

Regards


Daniel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20221005/b65267c8/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: WP_20221004_20_30_36_Pro.jpg
Type: image/jpeg
Size: 2052078 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/spridgets/attachments/20221005/b65267c8/attachment.jpg>