[Spridgets] Name that part (real LBC content).

Weslake1330 weslake1330 at gmail.com
Thu Oct 6 12:52:09 MDT 2022


Ok, maybe it was that badly made?  I do think the camera distorted one side
from the other.  It is blanking plate to fit on the end of the Inlet
manifold on my Sprite when I have removed the Weber 45 DCOE.  I have a
thick gasket stuck on the other side.  I think it's a neater solution than
rag stuffed down it or a taping up job.

Regards


Daniel

On Thu, 6 Oct 2022 at 08:41, GUY DAY <grday at btinternet.com> wrote:

> A hole carrier.
>
> A Lucas parts template
> A very difficult to judge sized hole carrier or template for Lucas parts
> shown without a scale bar.
>
>
>
> ------ Original Message ------
> From: "Weslake1330 via Spridgets" <spridgets at autox.team.net>
> To: "Spridgets" <spridgets at autox.team.net>
> Sent: Wednesday, 5 Oct, 22 At 20:26
> Subject: [Spridgets] Name that part (real LBC content).
>
> Hi List,
>
> Well the part doesn't have a real name because I made it from 6 mm (its
> probably old enough to be 1/4") aluminium plate the previous owner of my
> house left behind in the garage about 20 years ago. If I could have bought
> one I would have.
>
> Lacking both a pillar drill and a Rolls-Royce (aviation?) apprenticeship
> where you get to file metal blocks for several years, it's almost the best
> I could manage. The Bosch jigsaw wasn't keen (it never is) on cutting
> aluminium plate this thick but managed some of it.
>
> I'm not particularly tempted to make another one because it's not
> something I'm likely to use very often and it will get the job done despite
> being slightly lower than the standard I'd hoped for. So, what is it?
>
> Regards
>
>
> Daniel
> ------------------------------
> ------------------------
>
> spridgets at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/pipermail/spridgets
> http://autox.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/grday@btinternet.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20221006/2fb40981/attachment.htm>


More information about the Spridgets mailing list