<div dir="ltr">Hi List,<div><br></div><div>Well the part doesn't have a real name because I made it from 6 mm (its probably old enough to be 1/4") aluminium plate the previous owner of my house left behind in the garage about 20 years ago.  If I could have bought one I would have.</div><div><br></div><div>Lacking both a pillar drill and a Rolls-Royce (aviation?) apprenticeship where you get to file metal blocks for several years, it's almost the best I could manage.  The Bosch jigsaw wasn't keen (it never is) on cutting aluminium plate this thick but managed some of it.</div><div><br></div><div>I'm not particularly tempted to make another one because it's not something I'm likely to use very often and it will get the job done despite being slightly lower than the standard I'd hoped for.  So, what is it?</div><div><br></div><div>Regards</div><div><br></div><div><br></div><div>Daniel</div></div>