[Spridgets] 948 oversize thrust washers

Mark Haynes 220caribou at gmail.com
Sun Mar 7 07:37:24 MST 2021


Thanks Ron ,
I thought that i"d searched the APT website completely. Obviously I was
wrong,  can the 998 washers be modified to fit the 948? He's got+10 for
948s, but!30s for 998s.

On Sun, Mar 7, 2021, 6:20 AM Ron Soave <soavero at yahoo.com> wrote:

> https://www.aptfast.com/browse?category=145638&keyword=Thrust&page=6
>
> Ron Soave
>
> On Mar 6, 2021, at 7:19 PM, Mark Haynes via Spridgets <
> spridgets at autox.team.net> wrote:
>
> 
> Does anyone make oversize thrust washers for 948s anymore? I've got .018"
> of endfloat on the crank with standard washers (measured with feeler
> gauges) which is way too much. If no one makes them, how do you build an
> engine that needs .003-.005" of endfloat when someone has remachined the
> thrust surfaces?
> Mark Haynes
> It only goes one way- Pay It Forward
> ------------------------
>
> spridgets at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/pipermail/spridgets
> http://autox.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/soavero@yahoo.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20210307/ae7aabe5/attachment.htm>


More information about the Spridgets mailing list