[Spridgets] 948 oversize thrust washers

[Ron Soave]

https://www.aptfast.com/browse?category=145638&keyword=Thrust&page=6

Ron Soave

> On Mar 6, 2021, at 7:19 PM, Mark Haynes via Spridgets <spridgets at autox.team.net> wrote:
> 
> 
> Does anyone make oversize thrust washers for 948s anymore? I've got .018" of endfloat on the crank with standard washers (measured with feeler gauges) which is way too much. If no one makes them, how do you build an engine that needs .003-.005" of endfloat when someone has remachined the thrust surfaces?
> Mark Haynes
> It only goes one way- Pay It Forward
> ------------------------
> 
> spridgets at autox.team.net
> 
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
> 
> Archive: http://www.team.net/pipermail/spridgets  http://autox.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/soavero@yahoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20210307/051d327a/attachment.htm>