[Spridgets] 948 oversize thrust washers

[Ron Soave]

No problem! I don’t know for sure but I think so. I gave up 948s for Lent years ago. 

Ron Soave

> On Mar 7, 2021, at 8:37 AM, Mark Haynes <220caribou at gmail.com> wrote:
> 
> 
> Thanks Ron ,
> I thought that i"d searched the APT website completely. Obviously I was wrong,  can the 998 washers be modified to fit the 948? He's got+10 for 948s, but!30s for 998s.
> 
>> On Sun, Mar 7, 2021, 6:20 AM Ron Soave <soavero at yahoo.com> wrote:
>> https://www.aptfast.com/browse?category=145638&keyword=Thrust&page=6
>> 
>> Ron Soave
>> 
>>>> On Mar 6, 2021, at 7:19 PM, Mark Haynes via Spridgets <spridgets at autox.team.net> wrote:
>>>> 
>>> 
>>> Does anyone make oversize thrust washers for 948s anymore? I've got .018" of endfloat on the crank with standard washers (measured with feeler gauges) which is way too much. If no one makes them, how do you build an engine that needs .003-.005" of endfloat when someone has remachined the thrust surfaces?
>>> Mark Haynes
>>> It only goes one way- Pay It Forward
>>> ------------------------
>>> 
>>> spridgets at autox.team.net
>>> 
>>> Donate: http://www.team.net/donate.html
>>> Suggested annual donation: $12.75
>>> 
>>> Archive: http://www.team.net/pipermail/spridgets  http://autox.team.net/archive
>>> 
>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/soavero@yahoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20210307/07387cdb/attachment.htm>