[Spridgets] 948 oversize thrust washers

[Mark Haynes]

Does anyone make oversize thrust washers for 948s anymore? I've got .018"
of endfloat on the crank with standard washers (measured with feeler
gauges) which is way too much. If no one makes them, how do you build an
engine that needs .003-.005" of endfloat when someone has remachined the
thrust surfaces?
Mark Haynes
It only goes one way- Pay It Forward
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20210306/51375b0e/attachment.htm>