[Spridgets] Sprite Mirror bracket

[Weslake1330]

Hi List,

I've just finished making my first mirror bracket.  Well actually it's the
second because I abandoned the first one part finished as it wasn't quite
right.  I'm pleased with the end result but I'll be making another one as
this one isn't quite perfect.  Yep, it does stick out a bit from the
bodywork (just under 3 inches) but its supposed to because being close to
the car's bodywork makes it much less aerodynamic (air sees a bigger bulge
than the actual mirror).  Very wet here so it may be a week before it gets
road tested - the worst that can happen is that it vibrates and I need to
use thicker aluminum sheet (this was 1.2mm) or stainless steel sheet.

Photos attached.

Regards
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20191102/de68ef82/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: WP_20191102_16_53_21_Pro.jpg
Type: image/jpeg
Size: 1395935 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/spridgets/attachments/20191102/de68ef82/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: WP_20191102_16_53_08_Pro.jpg
Type: image/jpeg
Size: 1924738 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/spridgets/attachments/20191102/de68ef82/attachment-0001.jpg>