[Spridgets] Master Cylinders

[Bob Kitterer]

OK, I am at my wits end tiring to get the hydraulics to work.  So who / where should I go to get the master cylinders rebuilt which may mean reboring.  I have separate masters for the brakes and the clutch, early Sprite MK IV.  Also am using silicon brake fluid.

Recently honed and put new seals in both masters, brake and slave cylinders and disk calipers.  Am getting no fluid movement in the brakes.  Have fluid in the clutch slave but not enough pressure to move the slave cylinder.  The clutch slave has Gerard's remote bleed valve an fluid moves through this valve with no air.


Bob  Kitterer

1960 Austin Healey Sprite (Mk IV in disguise)
1966 Austin Healey Sprite Mk III (Trevor) - still in boxes
2013 Miata

Pay it Forward
Thanks Frank

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20160417/b1df9034/attachment.html>