[Spridgets] Bugeye ignition switch

[Frank Clarici]

Phil

Pull the banjo bolt just above the oil pressure gauge pipe on the block, 
pour an ounce or 2 of oil down that hole in the block.
This primes the oil pump. Pull the plugs and crank it over for a good 30 
seconds.
The oil pressure may not show on the gauge from cranking but replace the 
plugs and fire it up with an eye on the oil gauge.
If no pressure in a few seconds of running, shut it down.
>


-- 
Frank Clarici
Toms River, NJ