[Spridgets] Steering rack and horn grounding

[Frank Clarici]

Tannen, Skip wrote:
> Folks,
>
> I'm looking for some advice on horn grounding.  
The rack is (was) mounted on paper gaskets at the clamps, add a rubber 
collar where it bolts to the body under the dash
and all that is left is the tie rod ends which are floating in grease.
Now stick the inner column down the tube with a felt bushing on each end.
If you painted everything up real nice, forget about a good ground.
The only true ground is where the inner column meets the pinion.
The horn push grounds on the column, not the outer tube.
The ground really should be at the tie rod ends to the steering arms. 
Clean that point to bare metal.



-- 
Frank Clarici
Toms River, NJ