[Shop-talk] Miter saw blade for plastic tiles

[Jeff Scarbrough]

On Sun, Nov 10, 2019 at 8:37 PM Steven Trovato via Shop-talk <
shop-talk at autox.team.net> wrote:

> I found lots of opinions on this, including some people who put the blade
> on the saw backwards!  Yes, on purpose.
>

I've built a lot of research equipment out of PVC pipe.  Table saw with the
blade on backwards makes absolutely the smoothest cut ever.

Jeff Scarbrough
Corrosion Acres, Ga.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20191112/164bec7a/attachment.htm>