[Shop-talk] Miter saw blade for plastic tiles

[old dirtbeard]

Thanks Jeff,

Does it reduce the amount of chip/dust mess?

On Tue, Nov 12, 2019, 4:14 AM Jeff Scarbrough via Shop-talk <
shop-talk at autox.team.net> wrote:

>
>
> On Sun, Nov 10, 2019 at 8:37 PM Steven Trovato via Shop-talk <
> shop-talk at autox.team.net> wrote:
>
>> I found lots of opinions on this, including some people who put the blade
>> on the saw backwards!  Yes, on purpose.
>>
>
> I've built a lot of research equipment out of PVC pipe.  Table saw with
> the blade on backwards makes absolutely the smoothest cut ever.
>
> Jeff Scarbrough
> Corrosion Acres, Ga.
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/pipermail/shop-talk
> http://autox.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/dirtbeard@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20191112/c702c2c6/attachment.htm>