[Nobbc] Ignition Switch

[gonzosaurs at comcast.net]

Look for a set screw that might have loosened and fell to the floor. They can be about very small. Look on the under side of the mechanism to see if there is a small threaded hole. 

good luck 
gonzo, 
tr-250 
tr-6 
----- Original Message ----- 
From: "William Cummings" <wildbillbart2 at yahoo.com> 
To: "North Bay British Car Club" <nobbc at autox.team.net> 
Sent: Monday, October 12, 2009 4:31:36 PM GMT -08:00 US/Canada Pacific 
Subject: [Nobbc] Ignition Switch 

Ok here goes- 

I have a '73 MGB and curiously in turning off and removing the key the whole 
ignition switch barrel came with it. Putting it back in still starts the car 
but obviously there must be a locking ring or something that holds it in. The 
diagram in my "The Complete Official MGB 1962-1974" really doesn't show much. 
The same with Moss and other sources. What's up and how do you solve this 
problem? 

Thanks, 

Bill Cummings 
'73 MGB 


--- On Thu, 10/8/09, Ron Engelhardt <nobbc at sonic.net> wrote: 


From: Ron Engelhardt <nobbc at sonic.net> 
Subject: [Nobbc] Ride Reminder 
To: nobbc at autox.team.net 
Date: Thursday, October 8, 2009, 11:52 PM 


We will meet at 10 AM this coming Saturday 10/10 at 10AM in the Bad Ass Coffee 
parking lot, corner of Old Redwood Hwy and Mark West Springs Rd. 

Ron 
58 MGA 
_______________________________________________ 
Nobbc mailing list 
Nobbc at autox.team.net 
http://autox.team.net/mailman/listinfo/nobbc 
_______________________________________________ 
Nobbc mailing list 
Nobbc at autox.team.net 
http://autox.team.net/mailman/listinfo/nobbc