[Mgs] MGB clutch slave bleeding issues

[Barney Gaylord]

The hose must go in the end port of the 
slave.  The bleed nipple must go in the side 
port, which does come out from the highest point inside tke cylinder.
http://mgaguru.com/mgtech/hydraulics/ht106.htm


At 02:38 PM 9/4/2023, William Killeffer wrote:
>I’m pretty sure this gets into FAQ territory, 
>but I’m at the end of my tether here. The car 
>is my 1974 MGB. I’m attempting to replace the 
>clutch hydraulics. Bought the $60 some-odd kit 
>from Moss, which is seeming like a mistake. Got 
>the master mounted and fastened to the pedal and 
>all that. The slave has some kind of label with 
>it saying that the inlet hole and bleed screw 
>may be reversed. I might can see why, but the 
>hose included in the kit is only long enough to 
>go into what may be the wrong place, putting the 
>bleed screw in a place where it’s less 
>effective. What can I do? The holiday’s 
>ticking away and I really need to be able to get 
>the car into the garage under its own power. I 
>live alone and don’t have anyone who can help. 
>Please tell me something I can use because I’m 
>seriously about to lose it here. Thank you, -William ....


-- 
This email has been checked for viruses by AVG antivirus software.
www.avg.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20230904/f4876ec5/attachment.htm>