[Mgs] 72 MGB windows

[David Councill]

In those channels is a felt seal that hardens and disintegrates with age 
(so may be nonexistent).  Replacing those on both sides of the window as 
well as adjusting the channels (loosening the bolts and getting them 
lined up correctly) should take care of the situation most likely.

Moss Motors part 458-610, less than $12 USD for a pair.

David Councill

72 B, 64 B, 67 BGT

On 9/6/2021 9:29 AM, dave wrote:
>
> I just picked this car up a week ago.  72 MGB which was clearly 
> restored by someone not that long ago. The owner I purchased it from 
> is not mechanical at all and bought the car as is.
>
> Moreso on the passenger side, the glass needs a little guidance or it 
> hits the side of the channel on the inside of the car when you try to 
> roll it up.  if you guide it a little so it stays in the channel then 
> it rolls up fine.  its just in the first 2 inches from bottom when you 
> roll it up.
>
> Here are some pics.  Not sure how clear or helpful they are.  All this 
> is accessible but I’m not sure what to do to fix it.  where/how do I 
> adjust to keep it in the channel those first 2 inchec?
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20210906/2331a443/attachment.htm>