[Mgs] Rubber bumper removal

[Max Heim]

Yes, they are different, but I think a conversion kit is available that supplies patch pieces to make up the difference. But I’ve never paid a lot of attention to this issue.

Sent from my iPad

> On May 1, 2020, at 1:30 AM, Hans Duinhoven via Mgs <mgs at autox.team.net> wrote:
> 
> 
> If my memory serves me well, the wings of the CB MG B differ of those of the RB MG B? Should these be replaced as well?
>  
> Cheers,
> Hans 71 BGT
>  
> Van: Mgs [mailto:mgs-bounces at autox.team.net] Namens PaulHunt73 via Mgs
> Verzonden: vrijdag 1 mei 2020 9:12
> Aan: Jim Ray; MG Digest
> Onderwerp: Re: [Mgs] Rubber bumper removal
>  
> In the load space.  Five studs - two each side and one centrally going through into the spare wheel space. The outer corners are supported by one bracket each side, but it is not necessary to unbolt these from the body to remove the bumper, as the bumper has slots which slide off the brackets.
> 
> PaulH.
> 
> ----- Original Message ----- 
> > Front seems easy to remove but don't know where the blots are for the 
> > rear. Can anyone help?
> 
> 	Virusvrij. www.avast.com
> _______________________________________________
> 
> Mgs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/mgs http://autox.team.net/archive
> 
> Unsubscribe: http://autox.team.net/mailman/options/mgs/mvheim@sonic.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20200501/243c66b7/attachment.htm>