[Mgs] Rubber bumper removal

[Hans Duinhoven]

If my memory serves me well, the wings of the CB MG B differ of those of the
RB MG B? Should these be replaced as well?

 

Cheers,

Hans 71 BGT

 

Van: Mgs [mailto:mgs-bounces at autox.team.net] Namens PaulHunt73 via Mgs
Verzonden: vrijdag 1 mei 2020 9:12
Aan: Jim Ray; MG Digest
Onderwerp: Re: [Mgs] Rubber bumper removal

 

In the load space.  Five studs - two each side and one centrally going
through into the spare wheel space. The outer corners are supported by one
bracket each side, but it is not necessary to unbolt these from the body to
remove the bumper, as the bumper has slots which slide off the brackets.


PaulH.

----- Original Message ----- 
> Front seems easy to remove but don't know where the blots are for the 
> rear. Can anyone help?



-- 
Dit e-mailbericht is gecontroleerd op virussen met Avast antivirussoftware.
https://www.avast.com/antivirus
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20200501/b60f9e3e/attachment.htm>