[Mgs] Clutch slave / hard pipe

[Max Heim]

Yeah, you do not want to replace the hard pipe... unless the engine is out — then it would be easy. 

Try loosening everything else up. That particular location is terrible for starting threads.

Sent from my iPhone

> On Aug 4, 2018, at 4:29 PM, Charley Robinson via Mgs <mgs at autox.team.net> wrote:
> 
> First, have a beer. :-) Now check that you have the right hose.  Maybe they sent you the wrong one as to thread size?  Have another beer.  Are the threads are boogered up somewhere?
> 
> CR
> 
>> On 8/4/2018 2:58 PM, Thomas Gunderson via Mgs wrote:
>> Changed slave cylinder. Now the hard line pipe wll not thread into the new slave hose connection. I checked all the thread fittings. All are good. Any suggestions on the alinement of the pipe and slave hose? Maybe replace the hard line pipe with NICOPP?
>> Tom Gunderson
>> 1957 MGA 1500 rst
>> 
>> Sent from my iPhone X
>> 
>> 
>> 
>> _______________________________________________
>> 
>> Mgs at autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>> 
>> Archive: http://www.team.net/pipermail/mgs
>> 
>> Unsubscribe: http://autox.team.net/mailman/options/mgs/charley38@twc.com
>> 
> 
> _______________________________________________
> 
> Mgs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/mgs
> 
> Unsubscribe: http://autox.team.net/mailman/options/mgs/mvheim@sonic.net
>