[Mgs] Clutch slave / hard pipe

[Charley Robinson]

First, have a beer. :-) Now check that you have the right hose.  Maybe 
they sent you the wrong one as to thread size?  Have another beer.  Are 
the threads are boogered up somewhere?

CR

On 8/4/2018 2:58 PM, Thomas Gunderson via Mgs wrote:
> Changed slave cylinder. Now the hard line pipe wll not thread into the new slave hose connection. I checked all the thread fittings. All are good. Any suggestions on the alinement of the pipe and slave hose? Maybe replace the hard line pipe with NICOPP?
> Tom Gunderson
> 1957 MGA 1500 rst
>
> Sent from my iPhone X
>
>
>
> _______________________________________________
>
> Mgs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/mgs
>
> Unsubscribe: http://autox.team.net/mailman/options/mgs/charley38@twc.com
>