[Mgs] Coil type for a 1980 MGB

Tue Sep 1 10:21:06 MDT 2015

Are we on the same page?  The way I read it, it was a resistance 
measurement from the coil positive wire to the white or white/brown wire 
on the fuse box, with the ignition switch turned on, in order to find 
out if there was a ballast wire in the coil harness.  I wouldn't attach 
my ohmmeter to a hot circuit.

CR

On 9/1/2015 2:27 AM, PaulHunt73 wrote:
> Not needed, you have to remove the wires from the coil terminals 
> anyway (which I should have mentioned) or you get incorrect readings.
> PaulH.
>
>     ----- Original Message -----
>
>     Might be a good idea to disconnect the battery before making the
>     resistance measurement.
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20150901/7d1dadd9/attachment.html>