[Mgs] B/GT light switch

PaulHunt73 paulhunt73 at virginmedia.com
Fri Mar 14 02:38:44 MDT 2014


Excellent.

----- Original Message ----- 
> After more time flat on my  back under the dash [driver's seat having been 
> removed], with the help of a very small flashlight and a dental mirror so 
> I could see the bottom of the switch, I discovered that the wire clip 
> holds only the switch bezel in place (the four lugs on the bezel's sides 
> are irrelevant).  The switch itself is pushed into the bezel from the 
> front of the dash, and is held in place by two lugs, one on the top and 
> one on the bottom of the switch.  It's possible to push the bottom lug 
> upward with a small screwdriver just enough to get it started into the 
> bezel opening; then the top one can be pushed down with a finger enough to 
> free the switch and push it forward and out.


More information about the Mgs mailing list