[Mgs] Progress in the TD's cockpit wiring

[Dan DiBiase]

It's starting to look like a real car again, Rick!

Dan D
________________________________
 From: Richard Lindsay
<richardolindsay at gmail.com>
To: "mgs at autox.team.net List"
<mgs at autox.team.net>; "mg-t at autox.team.net" <mg-t at autox.team.net>; Rui Gigante
<rui.gigante at gmail.com> 
Sent: Friday, October 25, 2013 5:52 PM
Subject: [Mgs]
Progress in the TD's cockpit wiring
 

Hello Friends,

This afternoon I
installed the turn signal relay box. As I wrote
earlier, the harness did not
match my car's orientation. Today I added
about 12" of wire to the eight
harness wires and installed the relay
box where I found it. Here's how it
looks today.

http://www.aubard.us/MGTD/20131025_154927.jpg

I'll unmount the
box and lay it back from the panel so I can paint the
metal with POR15. I'll
then reattach it once the anti-rust coating is
cured. Here's how the cockpit
looks now.

http://www.aubard.us/MGTD/20131025_162030.jpg

I still need to
unbolt the steering column from the support so I can
slip on the new draft
excluder. Yea, there's no end to the fun.

-rick
_______________________________________________

Mgs at autox.team.net
Donate:
http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive:
http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/mgs/d_dibiase@yahoo.com