[Mgs] 67 MKI upper steering column nylon bearing

PaulHunt73 paulhunt73 at virginmedia.com
Fri Sep 7 02:00:43 MDT 2012


You should be able to do that on a North American Mk1 (pre 1972 models 
elsewhere), as far as I'm aware on non-collapsible columns it does just pull 
straight out, it was a separately quoted part.

PaulH.

----- Original Message ----- 
> I was hoping to remove the top bolt from the steering universal, pull out 
> the
> top inner shaft and then remove the old bushing and replace the new one to
> take up the play I have there. 


More information about the Mgs mailing list