[Mgs] 67 MKI upper steering column nylon bearing

[Max Heim]

I'm pretty sure I used the nylon bushing on my 66 B, and it wasn't a
tremendous hassle. I can't really recall the details, though.

--

Max Heim
'66 MGB GHN3L76149
If you're near Menlo Park, CA,
it's the primer red one with chrome wires

on 9/6/12 7:15 PM, W. David Houser at mgs4dave at tampabay.rr.com wrote:

> Listers,
> Has anyone replaced this bearing at the top of the steering column between the
> outer and inner shafts of their early MGB?
> I was hoping to remove the top bolt from the steering universal, pull out the
> top inner shaft and then remove the old bushing and replace the new one to
> take up the play I have there. Then hopefully replace the inner shaft. Is
> there another/easier way to go about this? I haven't found a thing online or
> in any of the collection of MGB books that I have.
> TIA,