[Mgs] Overflow Tubes bracket

[Rod Williams]

Thanks for all the email with suggestions on where the carburetor float bowl
overflow tube bracket is attached. It turns out that the 1967 18GB engine
does not have the redundant mechanical fuel pump boss in the casting.
Earlier ones do. My car has the bracket for the overflow tubes attached at
the same place on the block that the driver's side motor mount top flange
bolts to the engine. The winner with the correct info was Lawrie Alexander.
Thanks everyone. Now get out there and drive!

Pix of the bracket installed at:
    http://web.mac.com/rodwilliamsca/iWeb/Site/MGB.html

Thanks again.
-- 
-Rod-