[Mg-t] Bonnet 'clip'

[Charlie Baldwin]

Rick,

Try this link: http://www.ktvintagecars.com/brackets.html

Charlie


On 10/19/2017 6:31 PM, Spook01 wrote:
> Aftermarket.  Some few guys have made them, but dunno if any were made commercially.
>
>> On Oct 19, 2017, at 12:20 PM, Richard Lindsay <richardolindsay at gmail.com> wrote:
>>
>> Hello Friends,
>>     At a recent All British Car Show, sponsored by the Houston MG club, I saw a TD with little clips on the upper ends of the radiator support rods. They allowed the bonnet to rest mostly open, with the lower front rubber corner piece on a little 'U' shaped piece under the bolt. I really liked it. Is it a correct item, or something aftermarket?
>>     Thanks.
>>
>> -rick
>> ______________________________________________
>>
>> Mg-t at autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation  $11.47
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/mg-t/spook01@comcast.net
>>
> ______________________________________________
>
> Mg-t at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/mg-t/mgcharlie@comcast.net
>
>