[Healeys] Isky cam

[i erbs]

Thanks
I think mine was at .015, when we adjusted them back to stock. It left me
thinking we should not have.
Thanks

Ira Erbs
Milwaukie, OR
1959 Austin Healey 100-6


On Tue, Mar 12, 2024, 5:13 PM John and Kerry Rowe <jtkarowe at gmail.com>
wrote:

> I have a 240 grind. Valve lash is always greater than standard specified.
> Mine runs .016", which is .004" greater than OEM spec.
> John Rowe
> Queensland Australia
> 59BT7
>
> On Wed, Mar 13, 2024 at 9:38 AM i erbs <eyera3000 at gmail.com> wrote:
>
>> Hello all,
>> We are inching towards driving season here in NW Oregon.
>> When I built my engine in 1975 I had Ed Iskadarian cut me a hotter street
>> cam for my BT7 engine. I of course lost the info card. Is there any way to
>> determine the valve lash? Or should I use OEM and leave it alone?
>> Is there any way without removing it to figure out the grind?
>> Thanks in advance for any help.
>> Ira.
>>
>> Ira Erbs
>> Milwaukie, OR
>> 1959 Austin Healey 100-6
>>
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>>
>> Archive: http://www.team.net/pipermail/healeys
>> http://autox.team.net/archive/healeys
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/jtkarowe@gmail.com
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20240312/e99fb3df/attachment.htm>