[Healeys] Isky cam

Richard Mayor boyracer466 at gmail.com
Tue Mar 12 19:08:42 MDT 2024


The most likely Isky grind that you got was the T36. It was advertised as the 3/4 race grind.  The full race was called the Isky T46 and was not recommended for a street car.  If I recall correctly the lash was a bit looser. But, you should be fine just using the stock valve lash numbers. 

 
Richard Mayor
boyracer466 at gmail.com


> On Mar 12, 2024, at 2:52 PM, i erbs <eyera3000 at gmail.com> wrote:
> 
> Hello all,
> We are inching towards driving season here in NW Oregon.
> When I built my engine in 1975 I had Ed Iskadarian cut me a hotter street cam for my BT7 engine. I of course lost the info card. Is there any way to determine the valve lash? Or should I use OEM and leave it alone?
> Is there any way without removing it to figure out the grind?
> Thanks in advance for any help.
> Ira.
> 
> Ira Erbs
> Milwaukie, OR
> 1959 Austin Healey 100-6
>    
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/boyracer466@gmail.com
> 



More information about the Healeys mailing list