[Healeys] Isky cam

[John and Kerry Rowe]

I have a 240 grind. Valve lash is always greater than standard specified.
Mine runs .016", which is .004" greater than OEM spec.
John Rowe
Queensland Australia
59BT7

On Wed, Mar 13, 2024 at 9:38 AM i erbs <eyera3000 at gmail.com> wrote:

> Hello all,
> We are inching towards driving season here in NW Oregon.
> When I built my engine in 1975 I had Ed Iskadarian cut me a hotter street
> cam for my BT7 engine. I of course lost the info card. Is there any way to
> determine the valve lash? Or should I use OEM and leave it alone?
> Is there any way without removing it to figure out the grind?
> Thanks in advance for any help.
> Ira.
>
> Ira Erbs
> Milwaukie, OR
> 1959 Austin Healey 100-6
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/jtkarowe@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20240313/b42f27ea/attachment.htm>