[Healeys] Temp sender sensor

[Michael Salter]

You need to use a 3/8" drive "deep " 5/8 AF socket. I would recommend
installing a hose clamp over the socket down near the split open end to
prevent the socket from spreading.
This is what I use.
[image: image.png]

M


On Thu, Mar 2, 2023 at 12:06 PM Fred Wescoe <fredwescoe at gmail.com> wrote:

> Listers,
>
> I am trying to remove the temp sensor from the head.  I cannot get a
> wrench on it.
> I know several people have cut a groove in a socket and slipped it over
> the sensor.  Anyone have an idea what size socket I should use and cut a
> slot in it?  Any other ideas are also appreciated.
>
> Thanks,
>
> Fred,
> 66 BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20230302/d5367459/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 567661 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20230302/d5367459/attachment.png>