[Healeys] Temp sender sensor

m.g.sharp at sympatico.ca m.g.sharp at sympatico.ca
Wed Mar 1 22:17:51 MST 2023


Fred – mine looks just like Mike’s – works a treat.  I have tried with a ring spanner but it slipped around the nut and of course you can’t put a clamp on it.

 

From: Healeys <healeys-bounces at autox.team.net> On Behalf Of Michael Salter
Sent: March 1, 2023 6:23 PM
To: Fred Wescoe <fredwescoe at gmail.com>
Cc: healeys <Healeys at autox.team.net>
Subject: Re: [Healeys] Temp sender sensor

 

You need to use a 3/8" drive "deep " 5/8 AF socket. I would recommend installing a hose clamp over the socket down near the split open end to prevent the socket from spreading.

This is what I use.



 

M

 

 

On Thu, Mar 2, 2023 at 12:06 PM Fred Wescoe <fredwescoe at gmail.com <mailto:fredwescoe at gmail.com> > wrote:

Listers,

 

I am trying to remove the temp sensor from the head.  I cannot get a wrench on it.

I know several people have cut a groove in a socket and slipped it over the sensor.  Anyone have an idea what size socket I should use and cut a slot in it?  Any other ideas are also appreciated.

 

Thanks,

 

Fred, 

66 BJ8

_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys

Healeys at autox.team.net <mailto:Healeys at autox.team.net> 
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20230302/4f60660a/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 567661 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20230302/4f60660a/attachment.png>


More information about the Healeys mailing list