[Healeys] Mating the overdrive to the transmission

[Elton S]

Lining up the splines in the OD.
Elton

On Mon, Jun 19, 2023 at 9:52 PM warthodson--- via Healeys <
healeys at autox.team.net> wrote:

> I spent the day assisting a friend trying to mate his OD to his
> transmission. The car is a '63 BJ7. The overdrive & Trans. were pulled to
> replace a few internal trans parts which was done & we did not run into any
> issues. We can get the OD to within approx. 1/2-3/4" of mating to the
> trans, but cannot close that gap. We have confirmed that the oil pump
> roller has been fully retracted. What are we bumping up against & how do we
> get past it?
> Gary Hodson
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/eps2660@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20230619/f90ebd21/attachment.htm>