[Healeys] Wiper rack fit

[Michael MacLean]

Trying to install the wiper rack and motor back into the BN2.  I find the
spindle nearest the wiper motor is just short of the hole in the shroud.
Not sure if it fit before the shroud was removed and put back on because
the rack and motor was given to me as a used setup for the 100 complete.
At least I think it is for a 100.  Anyone tell me what a BN2 wiper motor
looks like?  The distance between the two spindles is correct.  When I put
the spindles in place in the two holes in the shroud the rack does not
reach the wiper motor by 1/4 to 1/2 inch.  I bought a complete new rack
with spindles from the UK, but the tubing that connects to the wiper motor
is a straight piece of tubing, not curved like the original one.  I have
not compared it to the original curved one for length, but I suspect it is
short also.  Short of trying to make one myself, are there any vendors that
custom make the tubing in different lengths for the wiper rack?
Mike MacLean
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20220514/49962d58/attachment.htm>