[Healeys] Exhaust systems
healey.nut at gmail.com
Fri Jun 3 21:40:25 MDT 2022
Better than having three of the six pipes on my BJ8 SS system split over
several years along the entire pipe length manufacture seam! that you
can't even repair!
Suggest you just take it to a muffle shop and have them weld up the hole,
it will save you alot of grief.
On Sat, Jun 4, 2022 at 3:36 AM Stephen Hutchings <s.hutchings at rogers.com>
> I bought an entire new stainless system for my BJ8 last spring.
> I was determined to start with all new parts after some frustration with
> my old system.
> Since installing the new system,I’ve been struggling with leaks somewhere
> in front of the two main muffler/silencers…assuming of course that it was
> the connections there.
> Today I decided to stop assuming and found that the welds on the down
> pipes to the flex pipe were leaking quite noticeably…imagine my chagrin!
> I could actually hear it.
> I’ve fired off an email to the supplier, so I’ll let you know who they are
> when I’ve received a reply and heard what they have to say.
> All this is to say; it shouldn't be necessary, but if anyone is ordering a
> new exhaust system, I would quiz them about how carefully the welds are
> checked…I mean it has to be gas tight or why bother?!
> I’ll keep you posted.
> Stephen BJ8
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/pipermail/healeys
> Healeys at autox.team.net
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Healeys