[Healeys] Engine lift

[Michael MacLean]

How difficult is it to drop the engine in first then the trans through the
passenger compartment?
Mike macLean

On Tue, Jul 26, 2022 at 8:07 PM Roland Wilhelmy <sentenac.rw at gmail.com>
wrote:

> Mike, I R&Rd both a six and a four by myself. You can do it too. If it
> doesn't look right or feel right just back everything up and start over
> when you are fresh. Cover the shroud and the opening with towels or movers
> blankets to give you another quarter inch to change your mind. With the
> engine and tranny combo you will be tilting the engine a lot. Either raise
> the car an inch or so or be prepared to crawl underneath and pull the
> tranny tail back. Watch the sheet metal interface with the engine block.
> -Roland
>
> On Tue, Jul 26, 2022, 4:15 PM Michael MacLean <springer.mike51 at gmail.com>
> wrote:
>
>> I have a cherry picker and a load leveler to lift the engine for my BN2.
>> What's the best way to attach the lift to the engine to install it in the
>> car?
>> Mike MacLean
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>>
>> Archive: http://www.team.net/pipermail/healeys
>> http://autox.team.net/archive/healeys
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/sentenac.rw@gmail.com
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20220727/d3cd6d9c/attachment.htm>