[Healeys] Rivet squeezer

[Ray Juncal]

 Is that your rotisserie in the background? How did it come out? Photos?

    On Thursday, April 28, 2022, 02:24:21 PM PDT, Michael Salter via Healeys <healeys at autox.team.net> wrote:  
 
 Had a couple of recommendations but no solution.After some serious consideration I  sacrificed a steering joint separator.Problem solved.
On Wed., Apr. 27, 2022, 9:33 a.m. Michael Salter, <michaelsalter at gmail.com> wrote:

Has anyone come up with a rivet squeezing attachment which will work on the 13 x 1/8" flat head rivets across the rear shroud rail at the bottom of the boot lid? I have done these with a hammer, buck and punch in the past but would much prefer a squeezer for the job.
M
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healeyray@yahoo.com

  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20220429/96ce95b6/attachment.htm>