[Healeys] Rivet squeezer

[Michael Salter]

Had a couple of recommendations but no solution.
After some serious consideration I  sacrificed a steering joint separator.
Problem solved.

On Wed., Apr. 27, 2022, 9:33 a.m. Michael Salter, <michaelsalter at gmail.com>
wrote:

> Has anyone come up with a rivet squeezing attachment which will work on
> the 13 x 1/8" flat head rivets across the rear shroud rail at the bottom of
> the boot lid?
> I have done these with a hammer, buck and punch in the past but would much
> prefer a squeezer for the job.
>
> M
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20220428/4a8bf81f/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20220428_155229.jpg
Type: image/jpeg
Size: 716331 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20220428/4a8bf81f/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20220428_155415.jpg
Type: image/jpeg
Size: 1415501 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20220428/4a8bf81f/attachment-0001.jpg>