[Healeys] Rivet squeezer

[Bob Spidell]

I've wanted a rivet gun since I used one working on aircraft, but 
couldn't justify it for a Healey shroud (before my dad bought one).

Anyone know what they used at the factory, gun or squeezer?


On 4/28/2022 5:13 PM, Ray Juncal via Healeys wrote:
> Is that your rotisserie in the background? How did it come out? Photos?
>
> On Thursday, April 28, 2022, 02:24:21 PM PDT, Michael Salter via 
> Healeys <healeys at autox.team.net> wrote:
>
>
> Had a couple of recommendations but no solution.
> After some serious consideration I  sacrificed a steering joint separator.
> Problem solved.
>
> On Wed., Apr. 27, 2022, 9:33 a.m. Michael Salter, 
> <michaelsalter at gmail.com> wrote:
>
>     Has anyone come up with a rivet squeezing attachment which will
>     work on the 13 x 1/8" flat head rivets across the rear shroud rail
>     at the bottom of the boot lid?
>     I have done these with a hammer, buck and punch in the past but
>     would much prefer a squeezer for the job.
>
>     M
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20220428/e271747c/attachment.htm>