[Healeys] BN2 Fan Belt

[Bob Haskell]

with circles and arrows and a paragraph on the back of each one ...

Cheers,

Bob Haskell
Austin Healey 3000 BN7/BT7 registrar

On 10/17/21 10:01 AM, Bob Spidell wrote:
> I'm going to return it, with '8x10 colored glossy photographs.'
>
>
> On 10/17/2021 6:43 AM, warthodson at aol.com wrote:
>> Bob,
>> The way the vendors find out about an issue is if the customer tells 
>> them.  You should forward your message to Moss.
>> Gary Hodson
>>
>>
>> -----Original Message-----
>> From: Bob Spidell <bspidell at comcast.net>
>> To: Healeys <healeys at autox.team.net>
>> Sent: Sat, Oct 16, 2021 7:52 pm
>> Subject: [Healeys] BN2 Fan Belt
>>
>> I finally got around to fixing my loose water pump pulley and 
>> installing a new fan belt. I ordered a 'cogged' belt from Moss--part# 
>> 021-966--thinking it might work better than the original slab of 
>> rubber. I noticed before installing that it was narrower than the 
>> original type that I'd had, which had rotted, but it looked like it 
>> would work. Once I started tensioning it however, it was clear it 
>> /might /work, but sat too low in the pulleys, and was essentially 
>> riding on the bottom of the pulley grooves instead of on the sides 
>> (and the angle of the sides of the belt was incorrect). Anyone else 
>> tried one of these?
>>
>> I'm shocked, SHOCKED I TELL YA', that a vendor would sell something 
>> that could possibly work, but isn't truly correct.
>>
>> bs
>>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rchaskell@earthlink.net
>