[Healeys] BN2 Fan Belt
bspidell at comcast.net
Sun Oct 17 08:01:03 MDT 2021
I'm going to return it, with '8x10 colored glossy photographs.'
On 10/17/2021 6:43 AM, warthodson at aol.com wrote:
> The way the vendors find out about an issue is if the customer tells
> them. You should forward your message to Moss.
> Gary Hodson
> -----Original Message-----
> From: Bob Spidell <bspidell at comcast.net>
> To: Healeys <healeys at autox.team.net>
> Sent: Sat, Oct 16, 2021 7:52 pm
> Subject: [Healeys] BN2 Fan Belt
> I finally got around to fixing my loose water pump pulley and
> installing a new fan belt. I ordered a 'cogged' belt from Moss--part#
> 021-966--thinking it might work better than the original slab of
> rubber. I noticed before installing that it was narrower than the
> original type that I'd had, which had rotted, but it looked like it
> would work. Once I started tensioning it however, it was clear it
> /might /work, but sat too low in the pulleys, and was essentially
> riding on the bottom of the pulley grooves instead of on the sides
> (and the angle of the sides of the belt was incorrect). Anyone else
> tried one of these?
> I'm shocked, SHOCKED I TELL YA', that a vendor would sell something
> that could possibly work, but isn't truly correct.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Healeys