[Healeys] BN2 Fan Belt

[warthodson at aol.com]

Bob,The way the vendors find out about an issue is if the customer tells them.  You should forward your message to Moss.Gary Hodson


-----Original Message-----
From: Bob Spidell <bspidell at comcast.net>
To: Healeys <healeys at autox.team.net>
Sent: Sat, Oct 16, 2021 7:52 pm
Subject: [Healeys] BN2 Fan Belt

  I finally got around to fixing my loose water pump pulley and installing a new fan belt. I ordered a 'cogged' belt from Moss--part# 021-966--thinking it might work better than the original slab of rubber. I noticed before installing that it was narrower than the original type that I'd had, which had rotted, but it looked like it would work. Once I started tensioning it however, it was clear it might work, but sat too low in the pulleys, and was essentially riding on the bottom of the pulley grooves instead of on the sides (and the angle of the sides of the belt was incorrect). Anyone else tried one of these?
 
 I'm shocked, SHOCKED I TELL YA', that a vendor would sell something that could possibly work, but isn't truly correct.
 
 bs
 _______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/warthodson@aol.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20211017/5f3df76d/attachment.htm>