[Healeys] Clutch

[Ian Hey]

When I recently started my engine after a complete rebuild, with both clutch
cylinders rebuilt, the clutch would not fully disengage, so that to move the
car I had to start it in gear.  It seemed that the master cylinder was not
pulling in the required amount of fluid so ran out of travel.  Rebuilding
the master cylinder again fixed the problem.

 

Ian

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20211006/960fe03c/attachment.htm>