[Healeys] BJ8 back axle.

[Bob Haskell]

David,

The hole near the diff is for the breather.  The boss with the hole is 
to attach the brake line.

Cheers,

Bob Haskell
Austin Healey 3000 BN7/BT7 registrar

On 6/28/21 12:02 AM, David Lodge via Healeys wrote:
> Might anyone please have a photo with measurements of the metal 
> circular flange/guide (?) which is riveted or spot-welded to the rear 
> of the axle casing?
>
> As you can see, mine has gone walkabout and I would like a pop at 
> making it myself.
>
> Also, there is a hole drilled in the top of the axle casing quite near 
> the diff housing unlike the authentic breather at the opposite end.  
> Should I weld the hole
> up or weld another breather in its place?
>
> Thanks for any and all replies!
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rchaskell@earthlink.net
>