[Healeys] BJ8 back axle.

[David Lodge]

Might anyone please have a photo with measurements of the metal circular flange/guide (?) which is riveted or spot-welded to the rear of the axle casing?
As you can see, mine has gone walkabout and I would like a pop at making it myself.
Also, there is a hole drilled in the top of the axle casing quite near the diff housing unlike the authentic breather at the opposite end.  Should I weld the hole 
up or weld another breather in its place?
Thanks for any and all replies!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210628/891db165/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0928.JPG
Type: image/jpeg
Size: 613814 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20210628/891db165/attachment.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0926.JPG
Type: image/jpeg
Size: 555886 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20210628/891db165/attachment-0001.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0927.JPG
Type: image/jpeg
Size: 535936 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20210628/891db165/attachment-0002.jpe>